MODE Vehicle Research Cloud Evaluation Kit

Collecting data from vehicles can be challenging. Creating a device to collect data from a vehicle and send it via a cellular network reliably is not an easy task. MODE’s Vehicle Research Cloud takes care of the intricacies of data retrieval from a vehicle so you can focus on getting business value out of the data.

Box
MODE Gateway with ALPS Sensor Network Module
[Software Icon] Software
+
[Hardware Icon] Hardware
+
[Subscription Icon] Subscription

MODE Vehicle Research Cloud Evaluation Kit

The MODE vehicle gateway kit contains everything you need to collect data from your vehicle.

  • 1 × MODE Vehicle Gateway
  • 1 × OBD-II interface
  • 1 × 3G/4G LTE cellular modem (choose one)
  • 1 × 12V DC power adapter
  • 1 × 90-day subscription for MODE Vehicle Research Cloud

$799


Hardware Technical Specs

Processor
  • 1.0GHz NXP i.MX 6Quad Cortex-A9 quad-core SoC
HDD
  • 16GB eMMC Flash memory
Memory
  • 1GB DDR3 SDRAM onboard
Graphics
  • Vivante GC2000 GPU
  • 3 independent, integrated 3D/2D and video graphics processing units
  • Graphics engine supporting OpenGL® ES 2.0, OpenCL and OpenVG™ 1.1 hardware accleration
  • Supports MPEG-2, VC-1 and H.264 video decoding up to 1080p
  • Supports SD encoding
Audio
  • NXP SGTL5000 low power stereo codec
Networking
  • Micrel KSZ9031RNX Gigabit Ethernet transceiver with RGMII support
  • IEEE 802.11BGN 1T1R & BT4.0 combo USB module
  • MAX-7 u-blox 7 GPS/GNSS module
Front I/O
  • 1 Micro USB 2.0 OTG port
  • 1 9-pin D-sub connector (supports 1 CAN Bus and 1 COM TX/RX for debug)
  • 1 SCSI 50-pin D-sub connector (Backlight power, Dual-channel LVDS, 4 GPIO, I2C, Line out and MIC-in)
  • 1 MIC-in
  • 1 Reset button
  • 1 Power & WPAN/WWAN/WLAN LED
  • 1 Antenna hole
  • 1 4-pole Phoenix DC jack
Rear I/O
  • 2 USB 2.0 ports
  • 1 Gigabit Ethernet port
  • 2 Antenna connectors for Wi-Fi/BT and GPS
Dimensions
  • 150.5mm (W) × 48.1mm (H) × 103.3mm (D) (5.9" × 1.9" × 4.1")
Power Adapter
  • 9–36V DC-in (typical: 7W)